Sale!
Kanger Protank coil units
Kanger Protank coil units

(5 Pack) Genuine Kanger Replacement Coil Units for PROTANK and EVOD Series

$11.99 $8.99

NOT COMPATIBLE WITH PROTANK 3

Clear selection
SKU: n/a. Categories: , , .

Product Description

NOT COMPATIBLE WITH PROTANK 3
Replacement PRO Tank Atomizer Coils. If you’re using a standard 3.7v eGo battery any ohm will work, if you are using an eGo Variable Voltage Battery or a Higher Voltage Device the 2.2ohm or 2.5ohm is the best option for you.
Bottom coil clearomizers provide a nice warm vapor, with a very clean pure flavor, and reduced wicking issues since the liquid is always covering the wicks.Unlike other Clearomizers, the mouthpiece of the PRO Tank is permanently attached and it is filled from the bottom. This two-piece design is a major advantage over other tanks with replaceable atomizer heads. If the PRO Tank Coil fails unexpectedly and the tank is filled with eLiquid, the atomizer head can be easily replaced without the need to drain the eLiquid out of the tank first.
Product Comes With:
5 - Replacement Coils for Kanger ProTank 1 and ProTank 2

How to fill PRO Tank Bottom Feeding Clearomizer:

  1. Hold the PRO Tank upside down with the drip tip facing down
  2. Unscrew the bottom assembly from the tube
  3. Fill with 3ml E-Juice by tilting the PRO Tank at a slight angle and dripping juice down the inside wall against the outer wall of Glass Tank.
  4. Do not put eliquid into the center tube as it will leak out the bottom of clearomizer.
  5. Screw the bottom assembly back onto tube.
  6.  Screw onto electronic cigarette device and you’re ready to vape.

How to change the atomizer head on Kanger PRO Tank Bottom Feeding Clearomizer:

  1. Unscrew the bottom assembly from the tube, remove the old coil and simply screw a new coil assembly into base.
  2. Fill with 3ml E-Juice by tilting the Pro Tank at a slight angle and dripping juice down the inside wall against the outer wall of Glass Tank.
  3. Do not put eliquid into the center tube as it will leak out the bottom of clearomizer.
  4. Screw onto electronic cigarette device and you’re ready to vape.

Tips for using the Glass Bottom Feeding PRO Tank:

  • The metal tube in the center of this Clearomizer leads from the mouthpiece to the battery end. Avoid getting liquid in this tube when filling the Clearomizer.
  • When unfastening the base (atomizer head) to refill the Clearomizer, the seals are temporarily broken and liquid will leak from the mouthpiece or escape into the center tube. Always wrap a cloth or piece of tissue around the mouthpiece when unfastening the base of the PRO Tank Clearomizer.
  • Gurgling noise or leaks: This is a sign that liquid has found its way into the metal tube in the center of the Clearomizer (and usually occurs after a refill). Ridding the center tube of liquid will resolve the issue. To do so without emptying the tank, remove the Clearomizer from the battery, wrap a cloth or tissue around the battery end of the Clearomizer and blow through the mouthpiece.
  • The atomizer head of the PRO Tank can loosen when unscrewing the tube or base. Always secure the atomizer head before re-installing the base of the PRO Tank.
  • It is normal to find a small amount of liquid in the battery contact area when removing the Clearomizer or any atomizer. Always clean the battery threads before charging it.
  • PRO Tank Atomizer heads have an average lifespan between 10 to 20 days. When the atomizer head wears down, it may begin to leak.

Reviews

There are no reviews yet.

Be the first to review “(5 Pack) Genuine Kanger Replacement Coil Units for PROTANK and EVOD Series”

close
Facebook IconYouTube IconVisit Our Instragram Stream